Multi-outlet circuit requirements are summarized by rating; dwelling circuits serve only that unit, and common-area circuits in a two-family home don't come from a unit's panel (NEC 210.24, 210.25).
Roof member notches and holes follow the floor joist rules; rafter tails may be notched if 3-1/2 in remains and the overhang is 24 in or less; ceiling joist taper cuts are a quarter of the depth at most.
Where a dryer duct is within 1-1/4 in of the finish face of framing, steel shield plates at least 0.062 in thick go on the face, extending 2 in above sole plates and below top plates.
Searches all 4,276 IRC 2024 sections, 5,532 IBC 2024 sections and defined terms (Chapters 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33 so far) and each city's local rules as they are added. Section numbers and titles from the International Residential Code and International Building Code, 2024 editions, copyrighted by the International Code Council; the IRC's electrical chapters (34 to 43) follow NFPA 70, the National Electrical Code. Requirements are summarized in our words (IRC Chapters 3 to 43, IBC Chapters 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33); read the full text at the link on each result. Local values come from each city's published documents.
Check your plans against these codes
Start an application and get every flag with its section and fix.