In unfinished basements and crawl spaces, NM/SE cable of 2-#6 or 3-#8 and larger may run on joist bottoms; smaller goes through bores or running boards; wall runs may be sleeved, sheath 1/4 in into the box and secured within 12 in (NEC 334.15(C)).
Methods of Grounding Conductor Connection to Electrodes
GECs connect to electrodes by exothermic welding or listed lugs, connectors or clamps rated for burial where buried; no solder, one conductor per clamp unless listed (NEC 250.70(A)).
Cables coming out of the ground are protected from the required cover depth (no more than 18 in) to 8 ft above grade, or to the building entry (NEC 300.5(D)).
Cables across joists or rafters within 7 ft of the floor in an accessible attic get guard strips as high as the cable; without permanent stairs or a ladder, only within 6 ft of the opening (NEC 320.23(A)).
Searches all 4,276 IRC 2024 sections, 5,532 IBC 2024 sections and defined terms (Chapters 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33 so far) and each city's local rules as they are added. Section numbers and titles from the International Residential Code and International Building Code, 2024 editions, copyrighted by the International Code Council; the IRC's electrical chapters (34 to 43) follow NFPA 70, the National Electrical Code. Requirements are summarized in our words (IRC Chapters 3 to 43, IBC Chapters 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33); read the full text at the link on each result. Local values come from each city's published documents.
Check your plans against these codes
Start an application and get every flag with its section and fix.